This customer from Burkina Faso customized a 3 axle 35ton power tanker trailer. When the trailer was just completed, our sales immediately sent pictures and videos to the customer, and the customer was very satisfied. This customer said that he didn't know much about the CIMC brand before, and accidentally found that a local colleague used CIMC brand semi-trailer, so he inquired about it, and then searched for CIMC brand semi-trailer products on Google.
After browsing our website many times, I finally downloaded the quotation on the website. However, this quotation is not comprehensive, and our products are customized. In order to reassure the customer, our sales team immediately contacted the customer and sent a more detailed quotation according to the customer's request. After considering the comparison, the customer finally chose the CIMC 3 axle 35ton powder tanker trailer.
CIMC 3 Axle 35ton Powder Tanker Trailer for Sale in Burkina Faso
The powder tanker trailer transport vehicle uses its own engine power to drive the vehicle-mounted air compressor through the power take-off, and sends the compressed air through the pipeline into the air chamber at the lower part of the sealed tank, so that the cement on the fluidized bed is suspended into a fluid state.
When the pressure in the tank reaches the rated value, the discharge butterfly valve is opened, and the fluidized cement flows through the pipeline for transportation. Made with domestic advanced technology, novel design, strong and durable. The air bag type has a large carrying capacity, a fast discharge speed and a small residual amount. The integrated tank has the characteristics of high overall strength, good rigidity, good pressure bearing, and good performance.
TITAN powder tanker trailer is a semi-trailer with a tank-type semi-trailer and a tank-type structure. Mainly used to transport liquids, bulk materials and bulk cement. The tank body is manufactured by three-dimensional design and advanced processing technology. The chassis adopts special chassis from various manufacturers, with advanced technology and reliable performance.
It is suitable for the transportation and air pressure unloading of dry materials such as fly ash, cement, lime powder and ore powder with a particle diameter of not more than 0.1mm. When the vertical height of the unloading reaches 15m, the horizontal conveying distance can reach 5m.
CIMC 3 Axle 35ton Powder Tanker Trailer for Sale in Burkina Faso
1. Transportation materials: fly ash, cement, lime powder, ore powder, etc. At the same time, according to the characteristics of various materials, the internal structure is specially designed to ensure transportation efficiency.
2. Material loading and unloading: convenient gravity loading at the top, quick unloading of high-pressure pipelines, less remaining material in the tank, effectively reducing loading and unloading time.
3. Transportation environment: flat roads, mountain roads, hills, dirt roads, etc.
4. Target group: It is mainly used for the logistics system of engineering construction, long-distance freight, transfer station, and professional powder material transportation.
CIMC 3 Axle 35ton Powder Tanker Trailer Details
1. Before opening the feed port, you must first open the pressure relief valve and the ball valve of the intake pipe. After removing the residual air in the tank, open the material cover to avoid injury.
2. Always pay attention to whether the pressure gauge is working properly, and prevent the pressure gauge from malfunctioning and overpressure, and the tank body will burst and leak.
3. Always check the safety valve to ensure that the pressure relief starts at 0.2Mpa, and the pressure in the tank must not exceed 0.2Mpa.
4. Frequently check whether the operation table is working properly to avoid over-rotation and damage to the air compressor and power take-off (especially for powder tank bicycles).
5. Always listen to the sound of the power take-off and the air compressor. If there is an abnormal sound, stop the machine immediately to eliminate the fault.
