CIMC 3 Axles 35m3 Dry Bulk Cement Tanker Trailer for Sale in Sudan
The client in Sudan is a purchasing manager for a cement bulker factory. Due to business expansion, he wants to buy a bulk cement trailer for cement transportation. Customers in Sudan learned about CIMC bulker trailer through the official website of CIMC. So the customer left a message under the CIMC website, leaving his contact information. After our sales manager Alice got in touch with the customer, the customer asked some questions about the dry bulk tanker trailer.
Under the patient communication of Alice, the sales manager, the Sudan customer quickly signed a contract with CIMC. Now the 3 axles 35m3 bulk cement purchased by the customer has been produced in the factory and will be sent to Port Sudan soon.
CIMC 3 Axles 35m3 Dry Bulk Cement Tanker Trailer for Sale in Sudan
Many customers who purchased CIMC bulk cement tanker are curious about the ash unloading operation process. The specific dry bulk trailer for sale ash unloading process is as follows:
1. Before cement bulker trailer unloading, check whether the unloading disc valve, external air source interface, exhaust valve and two feed ports are closed and tightened. If not, tighten them first to prevent air leakage;
2. Start the bulker trailer engine and shift the transmission to neutral, and at the same time step on the clutch pedal to completely separate the transmission from the engine;
3. Turn on the dry bulk tanker power take-off solenoid valve switch, and at the same time slowly release the clutch pedal to make the air compressor rotate;
4. Adjust the bulk cement trailer control handle of the control mechanism, adjust the speed of the air compressor to about 900r/min, and stabilize it;
CIMC 3 Axles 35m3 Dry Bulk Cement Tanker Trailer for Sale in Sudan
5. When the dry bulk trailer for sale pressure reaches 0.18MPa, first open the auxiliary blow pipe, then open the front and rear warehouse unloading disc valves, and start unloading. After that, the pointer of the air compressor will stabilize at a certain value;
6. When the cement bulker trailer air pressure drops to 0.04Mpa, the rear chamber has been unloaded, close the auxiliary blow pipe, open and close the disc valve of the rear chamber several times, and then close the disc valve of the rear chamber and the intake valve of the rear chamber, that is, only let the front chamber unload , after which the pressure will rise and stabilize to a certain value;
7. When the dry bulk tanker trailer pressure of the barometer reaches 0MPa, the unloading is completed, the air compressor is turned off (the power take-off switch is turned off), and the unloading disc valve is closed.
CIMC 3 Axles 35m3 Dry Bulk Cement Tanker Trailer for Sale in Sudan
Before opening the bulk cement trailer manhole, be sure to open the pressure relief valve to check whether the pressure in the tank is the same as the atmospheric pressure, that is, the pressure gauge value is zero.
After opening the bulk cement tanker manhole, check whether there is agglomerated powder or grain in the tank, remove the agglomerated powder or grain, and connect the discharge pipe to the required place to ensure reliable sealing.
CIMC 3 Axles 35m3 Dry Bulk Cement Tanker Trailer for Sale in Sudan
